Parameters

Presets

Use presets to quickly modify parameters to create a specific effect.

Basic parameters

• Random Seed:
  The random seed determines the random values of other parameters that use randomness in this filter.
• X Amount: 0-20
  Change the number of panels in the X axis
• Y Amount: 0-20
  Change the number of panels in the Y axis
• Seam Type:
  Select different styles of seams between panels
• Use Fasteners:
  Add fasteners between panels. When enabled the Fasteners section will appear in the list of parameters.

Panels

• Offset Amount: 0-1
  Offset each row of panels from the preceding row by a percentage of the panel size.
• Offset Random: 0-1
  Add a random value to the offset of each row
• Vertical Offset: toggle
  Switch between horizontal offset and vertical offset.
• Bulging Tension: -1 to 1
  Modify the normals of each panel to make it appear as if the panel is bulging inwards or outwards due to pressure.
• Wrinkles: 0-1
  Add subtle dents and wrinkles to panels
• Color Variation: 0-1
  Vary the color between individual panels randomly
• Reflection Variation: 0-1
  Vary the roughness of individual panels randomly

Seams

The selection of parameters in this section depends on which value you have chosen in Basic parameters > Seam Type.

• Gap
  • Seam Width: 0-1
    Modify the width between panel
  • Gap Variation: 0-1
    Offset panels by a small amount to make the gaps between panels vary in width
  • Gap Corner Rounding: 0-1
    Round the edges of panels
  • Gap Bevel: 0-1
    Bevel the edges of panels
• Weld
  • Seam Width: 0-1
    Modify the width between panels
  • Weld Quality: 0-1
    Adjust the uniformity of the weld
  • Weld Discoloration: 0-1
    Modify the amount of discoloration of the weld compared to the color of the panels.
  • Replace Weld Material: toggle
    Enable to customize the material used to create the weld. The following additional parameters will appear if this is enabled:
    • Weld Material Color: color select
      Select the color of the weld. This will still be impacted by Weld Discoloration.
    • Weld Material Roughness: 0-1
      Adjust the roughness of the weld seam between panels
• Overlap
  • Seam Width: 0-1
    Modify the width between panels
• Standing Seam
  • Seam Width: 0-1
    Modify the width between panels

Fasteners

• Fastener Type:
  Select the style of fastener to use between panels
• Fastener Amount: 3-10
  Change the number of fasteners to use along the edge between any two panels.
• Fastener Size: 0-1
  Modify the size of the fasteners
• Fastener Variation: 0-1
  Offset the position of the fasteners
• Replace Fastener Material: toggle
  Modify the material used for fasteners separately from the base material. When enabled, the following parameters appear:
  • Fastener Material Color: color select
    Select the color of the fastener material
  • Fastener Material Roughness: 0-1
    Modify the roughness of the the fastener material

Advanced

• Normal Intensity: 0-3
  Adjust the overall normal intensity of the material
• Seams Height Range: 0-1
  Modify how high the custom seams elevate above the panels
• Fastener Height Range: 0-1
  Modify the height of the fasteners
• AO Height Depth: 0-1
  Change the strength of the AO
• AO Radius: 0-1
  Modify the radius of the AO