Color management

Color information is communicated using numbers. Because different devices use different methods to record and display color, the same numbers can be interpreted differently and appear to us as different colors. A color management system keeps track of all of these different ways of interpreting color and translates between them so that images can look the same regardless of the device used to display them.

In general, a color profile is a description of a device-specific color space in terms of the transformations required to convert its color information to a device-independent color space.

In the specific case of working within After Effects, ICC color profiles are used to convert to and from the working color space in the following general workflow:

• An input color profile is used to convert each footage item from its color space into the working color space. A footage item may contain an embedded input color profile, or you can assign the input color profile in the Interpret Footage dialog box or interpretation rules file.

• After Effects performs all of its color operations in the working color space. You assign a working color space (project working space) in the Project Settings > Color tab.

• Colors are converted from the working color space to the color space of your computer monitor through the monitor profile. This conversion ensures that your composition will look identical on two different monitors if the monitors have been properly profiled. This conversion does not change the data within the composition. You can choose whether to convert colors for your monitor using the View > Use Display Color Management menu command. Learn more about enabling or disabling display color management.

• Optionally, After Effects uses a simulation profile to show you on your computer monitor how the composition will look in its final output form on a different device. You control output simulation for each view through the View > Simulate Output menu. Learn about how to simulate how colors will appear on a different output device.

• An output color profile for each output module is used to convert the rendered composition from the working color space to the color space of the output medium. You choose an output color profile in the Output Module Settings > Color tab.

By default, when you use color management, After Effects automatically adjusts colors to compensate for the differences in gamma between scene-referred color profiles and output-referred color profiles. Learn more about gamma and tone response.

Color management provides many benefits, including the following:

• The colors in imported images appear as the creators of the images intended.

• You have more control over how colors are blended within your project for everything from motion blur to anti-aliasing.

• The movies you create will look as you intend when viewed on devices other than your computer monitor.

If you don’t enable color management for your project, then the colors in your composition are dependent on the color characteristics of your monitor. The colors that you see are the colors that your monitor displays based on RGB numbers in your footage items. Because different color spaces use the same RGB numbers to represent different colors, the colors you see and the composite may not be the colors that the creator of the footage intended. The colors may be very far from the intended colors.

By setting a working color space for the project which enables color management, you do two things:

• You define a common color space for compositing and other color operations.

• You control the appearance of colors in your composition.

If a footage item has an embedded color profile (for example, the footage item is a Photoshop PSD file), then the colors intended by the person who created the image can be accurately reproduced in your composition. The color profile contains the information that determines how to convert the RGB numbers in the image file into a device-independent color space– the color profile of the monitor can then be used to determine which RGB numbers in the color space of your monitor represent the colors intended for the footage item. This automatic conversion becomes even more important as you import footage items with many different color profiles and from many different sources.

The color conversion process takes no effort on your part. The colors simply appear on your monitor just like they appeared when the image was created. Your monitor may have a limited gamut compared to the color space that you choose for the working space, and colors can be clipped when displayed on the monitor. However, you still have the full range of color data in your project, and the colors are not clipped internally.

When you are ready to output your composition, you can use color management to transform your colors into the space appropriate for your output media. At this stage, you are preserving the appearance of colors as you intend them to look.

Color profiles

The file format for color profiles is standardized by the ICC (International Color Consortium), and the files that contain them usually end with the .icc filename extension. After Effects comes with a large number of color profiles for color spaces for common (and some not so common) input and output types.

After Effects loads color profiles from multiple locations, including the following:

• macOS: Library/ColorSync/Profiles

• macOS: Library/Application Support/Adobe/Color/Profiles

• Windows: WINDOWS\system32\spool\drivers\color

• Windows: Program Files\Common Files\Adobe\Color\Profiles

All color profiles used in a project are saved in the project, so you do not need to manually transfer color profiles from one system to another to open the project on another system.

When you choose a profile—for input, output, or simulation—the motion-picture film profiles do not appear unless your footage is Cineon footage or you select Show All Available profiles. If your footage is Cineon footage, only the motion-picture film profiles appear, unless you select Show All Available Profiles.

Color management tips

• Be sure to read the helpful text in the Interpret Footage, Project Settings, and Output Module Settings dialog boxes. This text helps you to understand the color conversions that will be done as you interpret footage, composite, and output-rendered movies.
• Make sure that your work environment provides a consistent light level and color temperature. For example, the color characteristics of sunlight change throughout the day, which can alter the way colors appear on your screen, so keep shades closed or work in a windowless room.

Online resources about color management

• Johan Steen provides a detailed article on his website that explains color management in After Effects. The article also describes how to calibrate and profile a monitor, how to use color management in Photoshop, and how to work in a linear color space.
• For information on color profiles, see the International Color Consortium website.

Calibrate and profile your monitor

When you calibrate your monitor, the profiling utility lets you save a color profile that describes the color behavior of the monitor. This profile contains information about what colors can be reproduced on the monitor and how the color values in an image must be converted so that colors are displayed accurately. After Effects and your operating system can use this information to ensure that the colors that you see on your monitor look like the colors in the output movies that you create.

Video formats color managed in After Effects

If available, After Effects can read the embedded color space information in the imported media files and apply the appropriate color management to ensure that the colors in your video are accurately interpreted and consistent throughout your workflow. The following video formats are color-managed in After Effects:

• QuickTime ProRes
• MPEG (H264/HEVC)
• MXF (XAVC / AVC)
• Raw Formats
  • ARRI RAW
  • Sony RAW
  • RED RAW
  • ProRes RAW
  • Canon RAW

Choose a Color Engine

Color Engine in After Effects manages color information in a digital asset such as an image or a video. It uses a color management system, like the International Color Consortium (ICC) profile standard, for color conversion, color space management, storing color information, and color correction. Using a Color Engine ensures consistent and accurate color reproduction across different devices and file formats.

When you choose a Color Engine, you turn the color management on. You can now specify different color spaces for footage (Media Color Space) or render queue items (Output Color Space). If the specified space is different from the Working Color Space, color values will be converted from one space to the other.

When you select Adobe color managed, Adobe Color Engine (ACE) uses the International Color Consortium (ICC) profile standard to define, store color information, and convert between different color spaces such as RGB, CMYK, and many more. 

When OCIO color managed is selected, it will use Open ColoriO-based color transforms. The OCIO Configuration selected is ACE 2, and you can load a custom configuration using the Custom option in OCIO Configuration. Learn more about OpenColorIO and ACES color management.

Choose Working Color Space and enable color management

You turn color management on for a project by choosing a Working Color Space for the project under the Color tab of the Project Settings dialog box. 

You control color management for each footage item with the Interpret Footage dialog box or interpretation rules file. 

You control color management for each output item in the Output Module Settings dialog box.

If Working Color Space is set to None in the Project Settings dialog box, color management is off for the project.

Choosing a working color space is an essential step in managing color in a project. The colors of footage items are converted into the working color space as a common color space for compositing.

For best results, when working with 8-bpc color, match the working color space to the output color space. If you are rendering to more than one output color space, you should set the project color depth to 16 bpc or 32 bpc, at least for rendering for final output. The working color space should match the output color space that has the largest gamut. For example, if you plan to output to Adobe RGB and sRGB, then use Adobe RGB as your working color space because Adobe RGB has a larger gamut and can, therefore, represent more saturated colors. To preserve over-range values, work in 32-bpc color for its high dynamic range.

Suggestions for working color space choices:

• SDTV NTSC or SDTV PAL is a good choice if you’re making a movie for standard-definition broadcast television, including standard-definition DVD.

• HDTV (Rec. 709) is a good choice if you’re making a movie for high-definition television. This color space uses the same primaries as sRGB, but it has a larger gamut, so it makes a good working space for many kinds of work.

• ProPhoto RGB with a linear tone response curve (gamma of 1.0) is a good choice for digital cinema work.

• sRGB IEC61966-2.1 is a good choice if you’re making a movie for the Web, especially cartoons.

The color spaces available in After Effects vary based on the color profiles installed on your computer.

Color management and Mercury Transmit

The color values sent to the video monitor are from the working color space for the project. To preview video colors, choose a value for Working Color Space in the Project Settings dialog box that matches the color space of the preview device.

Video previews sent to an external monitor using Mercury Transmit are color-managed. Learn more about previewing on an external video monitor.

Color management and Dynamic Link

When color management is enabled for an After Effects project, compositions viewed over Dynamic Link are transformed using the Rec. 709 color profile. This prevents color or gamma shifts in the appearance of these compositions in Premiere Pro and Adobe Media Encoder.

Dynamic Link always assumes that all incoming frames are in Rec. 709. A color transformation is applied to the composition as a last step before the images are passed to Dynamic Link for use in Premiere Pro or Adobe Media Encoder. This corrects the composition image to the color space used by Dynamic Link.

Export color profiles to Adobe Media Encoder

Adobe Media Encoder can embed color profiles in JPEG files rendered from an After Effects composition.

Linearize working space and enable linear blending

If you have enabled color management (by specifying a working color space), you can perform all color operations in linear light by linearizing the working color space. A linearized color space uses the same primaries and white point as the nonlinear version. The tone response curve for the linearized color space is just a straight line.

If you have not enabled color management, you can still perform blending operations using a gamma of 1.0.

By performing operations in a linear color space, you can prevent certain edge and halo artifacts, such as the fringing that appears when high-contrast, saturated colors are blended together. Many color operations benefit from working in a linear color space, including those operations involved in image resampling, blending between layers with blending modes, motion blur, and anti-aliasing.

If you want to use a linearized working color space, do so when you set up the project instead of switching later. Otherwise, colors chosen in the color picker will change when you switch to a linear working color space because colors inside After Effects are interpreted to be in the working color space.

Interpret a footage item by assigning an input color profile

You control color management for each footage item using the Interpret Footage dialog box.

The input color profile determines what calculations are performed when converting the colors of a footage item into the working color space for the project. If a working space has not been set—that is, if color management is not on for the project—then you cannot assign an input color profile.

In some cases, files that you import have ICC profiles embedded in them. When you import these files, you can be confident that the colors that you see are as the producer of the footage originally intended. After Effects can read and write embedded color profiles for Photoshop (PSD), TIFF, PNG, and JPEG files.

If a footage item does not have an embedded color profile, you can assign an input color profile using the Interpret Footage dialog box or by adding or modifying a rule in the interpretation rules file (interpretation rules.txt). After Effects interprets the footage item as if the source footage was created using this color profile, so be certain to assign a profile that matches (or at least approximates) what was used to create the source footage.

Non-RGB footage items (such as CMYK, Y'CbCr, and camera raw images) cannot be assigned an input profile. Their native color space is displayed in the Interpret Footage dialog box. Conversion of non-RGB color values to RGB color values is handled automatically for each format.

If you don’t assign an input color profile, and After Effects doesn’t have a rule in the interpretation rules file with which to make an interpretation, the colors of the footage item are assumed to be in the working color space of the project.

When color management is enabled, the input color profile for a footage item is shown in the information area at the top of the Project panel.

The Interpret As Linear Light option under the Color tab determines whether the assigned input color profile is interpreted as being linear (gamma equals 1.0). This option also works when color management is turned off for the project. Learn more about gamma and tone response.

You can prevent the conversion of colors into the working color space for a single footage item by selecting Preserve RGB in the Color tab of the Interpret Footage dialog box. This option preserves RGB numbers; color appearance isn't preserved. Turning off color management for a specific footage item is useful when the footage item is not intended for visual display but instead for use as a control layer—for example, a displacement map.

Assign an output color profile

You control color management for each output item using the Output Module Settings dialog box.  

The output color profile for a render item determines what calculations are performed when converting the colors of a rendered composition from the working color space of the project to the color space for the output medium. If a project working space has not been set—that is, if color management isn't on for the project—then you cannot assign an output color profile.

For example, after creating a movie in an HDTV (Rec. 709) working color space for output to film, you likely want to output to a log-encoded Cineon/DPX color space using a film output color profile. If, on the other hand, you’re creating a movie for high-definition television, you should choose an HDTV (Rec. 709) output profile.

The output color profile for a render item is part of an output module and is displayed in the output module group in the Render Queue panel. You can assign multiple output modules to one render item, each with its own output color profile, allowing you to create output movies for various media from one rendered movie.

The Convert To Linear Light option under the Color tab of the Output Module Settings dialog box determines whether the colors are output to a linear color profile (gamma equals 1.0). It's seldom a good idea to output to linear light for 8-bpc or 16-bpc color, so the default setting for Convert To Linear Light is On For 32 bpc. Learn more about gamma and tone response.

Some file formats—such as Photoshop (PSD), PNG, TIFF, and JPEG—allow for the embedding of a color profile. If you embed a color profile in an output file, then you can be more certain that programs that use the file will correctly interpret its color information.

After Effects chooses a rendering intent based on the output color profile you select. For most output types, the rendering intent is relative colorimetric (with black point compensation); for output to film negative, it is absolute colorimetric.

You can prevent the conversion of colors from the working color space for a single output item by selecting Preserve RGB in the Color tab of the Output Module Settings dialog box. This option preserves RGB numbers; color appearance isn't preserved. Turning off color management for a specific footage item is useful when the footage item isn't intended for visual display but is instead intended for use as a control layer—for example, a displacement map.

Enable or disable display color management

When color management is on, the default behavior is for RGB pixel values to be converted to the color space of your computer monitor from the working color space for the project. Color appearance is preserved; RGB numbers are not preserved. This behavior is adequate for most uses, but you sometimes need to see how the colors are actually going to look when viewed through a system that does not use color management. For example, you may need to see how the colors will appear when viewed in a web browser.

When display color management is off, the RGB color values are sent directly to your monitor without any conversion through the monitor profile. RGB numbers are preserved; color appearance isn't preserved.

When display color management is on for a viewer, a yellow plus sign appears in the Show Channel And Color Management Settings button at the bottom of the viewer.

For each viewer (Composition, Layer, or Footage panel), you can choose whether to manage display colors, which involves the conversion of colors from the working color space to the color space of the monitor.

Output simulation settings (including No Output Simulation) are remembered.

Simulate how colors will appear on a different output device

Often, you need to preview how a movie will appear on a device other than your computer monitor. One purpose of color management is to ensure that colors look the same on every device, but color management in After Effects can’t overcome scenarios like the following:

• An output device for which you’re creating your movie has a smaller gamut than the working color space of your project, so the device is unable to represent some colors.

• The colors in your movie are displayed by a device or software that does not use color management to convert colors.

For example, when you are creating a movie using a computer monitor and a high-definition video monitor, you may need to see how the movie will look when transferred to a specific film stock and projected under standard theater viewing conditions.

In such situations, you’ll want to preview how colors will appear when they’re displayed on a device other than your computer monitor. Output simulation requires display color management.

During output simulation, colors are converted from the working color space for the project to the color space of the monitor through the following flow:

Colors are converted from the working color space to the color space of the output type using the output color profile (the same profile that will be used for rendering the final output).

If Preserve RGB is not selected, colors are converted from the output color space to the color space of the presentation medium using the simulation profile. This setting presumes that the simulated device also performs color management and will convert colors for display. Color appearance is preserved; RGB numbers are not preserved.

If Preserve RGB is selected, the color values are not converted in this step. Instead, the numeric RGB color values are preserved and are re-interpreted to be in the color space of the simulated device. One use of this simulation is to see how a movie will look when played back on a device other than the one for which it was intended or a device that does not perform color management.

Colors are converted from the presentation device color space to the color space of your computer monitor using the monitor profile.

When you create an output simulation preset, you can choose a profile to use for each of these steps.

Output simulation applies only to a specific viewer (Composition, Layer, or Footage panel) and works only for previews. Color conversions for output simulation are performed when values are sent to the display. Actual color numbers in the project are not changed.

As with all color space conversions, simulating output decreases performance somewhat, so you may not want to simulate output when performing tasks that require real-time interaction.

You can press Shift + / (on the numeric keypad) to turn display color management on or off. Turning display color management off also turns off output simulation. Simulation settings (including No Output Simulation) are remembered when display color management is off.

Simulate output for previews

You can choose an output simulation preset for each view. Custom output simulation settings are shared between all views.

Simulate an output type in a movie rendered for final output

Color management for output simulation is only for previews, but you can render a movie with a look that simulates a particular output type. For example, you can render a movie for HDTV that simulates a film appearance, which is especially useful for creating dailies when doing film work.

To enable and disable this type of output simulation, you can turn the adjustment layer on and off by selecting and deselecting its Video   switch in the Timeline panel.

Broadcast-safe colors

Analog video signal amplitude is expressed in IRE units (or volts in PAL video). Values between 7.5 and 100 IRE units are considered broadcast-safe; colors in this range do not cause undesired artifacts such as audio noise and color smearing. (In practice, some spikes over 100 IRE are legal, but for simplicity 100 IRE is considered the legal maximum here.) This range of 7.5-100 IRE is equivalent to a range from black to white of 64-940 in 10-bpc values for Y' in Y'CbCr, which corresponds to 16-235 in 8-bpc values. Therefore, many common video devices and software systems interpret 16 as black and 235 as white, instead of 0 and 255. These numbers don’t directly correspond to RGB values.

If you notice that colors of imported footage look wrong—blacks don’t look black enough, and whites don’t look white enough—make sure that you’ve assigned the correct input color profile. The common video color profiles included with After Effects include variants that account for these limited ranges, such as the HDTV (Rec. 709) 16-235 color profile, which interprets 16 as black and 235 as white.

You can use the Broadcast Colors effect to reduce luminance or saturation to a safe level, but the best way to limit output colors to the broadcast-safe range is to create your composition to not use colors out of this range. 

Keep in mind the following guidelines:

• Avoid pure black and pure white values.

• Avoid using highly saturated colors.

• Render a test movie and play it on a video monitor to ensure that colors are represented accurately.

The Color Finesse plug-in included with After Effects includes excellent tools that can help you keep your colors within the broadcast-safe range. For more information, see the Color Finesse documentation in the folder containing the Color Finesse plug-in. Learn more about color correction, color grading, and color adjustment.